Solenoid control valve is a kind of isolation valve,
which can substitute traditional gate valves, ball valve
and butterfly valves. The gate functioning is easily
controlled by electrical power. The valve can be
installed in fire control facility, water supply, or
distant location where it's difficult to control the gate
opening. The controller is directly fixed and can be
easily installed on piping site. nterchangeable between
manual and solenoid control.

　　　　　　　　　　　　Solenoid switch
※Specification of Solenoid Control Switch

1.Working Voltage:
　AC110V，220V 50 / 60Hz
2.Electrifying Time Range:
　1 year continuously for 10,000 hours
3.Allowable Voltage Range:±10%
4.Working Temperature:-5~80℃
5.Durability: 500,000 Cycles
6.Working Pressure Range:
　0.3kgf/cm2 ～10kgf/cm2
7.Generally NC (open when switch on)
　type, special order is needed for NO
　(close when switch off) type.
‧The working pressure should be greater than 0.3 kgf/cm2 , please check the pressure before installation.
‧Please remove impurities or metal dusts inside the pipe thoroughly.If possible, please add filter to prevent
　pipe blocking.
‧Special order is needed for acid, alkaline or oily fluid.
　　

‧Special order is needed for size over 14" or
　particular dimension.
‧Please refer to MULTI-FUNCTION AUTO-
　 CONTROL VALVES for valve body
　material, working pressure and flow.
　
size Type L A weight CV
2" Thread 200 187 10kg 75
3" Thread 235 200 15kg 140

size Type L A weight CV
2" Flange 190 187 12kg 75
2.5" Flange 210 192 15kg 105
3" Flange 225 210 18kg 140
4" Flange 250 222 24kg 260
6" Flange 310 260 44kg 550
8" Flange 420 300 87kg 1000
10" Flange 470 335 152kg 1600
12" Flange 530 370 202kg 2200


Distributed by OEMic Industries Inc.

Contact us